When adjusting the angle during the installation process, please follow the steps below to prevent damage to the camera:
Connect the camera to the terminal to ensure that the camera device can capture the image normally.
Place the camera in the position to be installed and adjust the pitch angle of the camera to confirm that the shooting screen is normal.
Record the installation position and scale of the camera.
Keep the camera angle adjustment normal and tighten the buckle that fixes the viewing angle.
Remove the protective film of the double-sided tape and install the camera in the location recorded during debugging.
If there is a deviation in the up and down shooting angle of the camera after installation, repeat steps 2, 3, and 4 to fine-tune the pitch angle of the camera.
